Racing 7 LG CX

The Fulcrum® Racing 7 CX represents a wheel that is accessible to all with the same Fulcrum® quality and performance found in the rest of the line.

Using a construction that includes an oversized flange, Spoke Dynamic Balance technology as well as a cross specific hub design this wheelset is a step above competitors in its class and ready to take on the rigors of the cyclocross season without any loss of performance.

These cyclocross wheels were further improved by incorporating an asymmetric rear rim that increases performance in terms of lateral and torsional rigidity as well as reactivity all without adding any weight.
The new advanced design actually represents an overall weight savings of nearly 90 grams over the previous model.
EUR 205


tyre typeClincher
tyre size28"
weight1769 g.
rim materialAluminum
rim material detailsAluminum
rim height categoryLow
rim heightFront: 24,5 mm and rear: 27,5 mm
rim width23 mm, ETRTO 17C
tyre width From 25 mm to 50 mm
braking systemCaliper
braking surface/braking optionsAluminum braking surface, turned
front axle compatibilityQR
rear axle compatibilityQR
front wheel spokes18 (9 left + 9 right)
rear wheel spokes20 (10 left + 10 right)
spokes materialStainless steel
spokes profile technologyRounded, J-pull
front hubAluminum, Aluminum flanges
rear hubAluminum, Aluminum flanges
bearingsIndustrial bearings system. Double seal on bearings
othersAluminum Axle
WEIGHT LIMIT 109 kg (Cyclist)
Bike rims - Racing 7 LG CX

Differentiated rim height

24 mm at the front to provide optimal handling; 27,5 mm at the rear for transmitting all your power to the wheel.
Machined braking surfaces allow for safe, powerful and adaptable braking in all weather conditions.

Asymmetric rear rim profile

Asymmetrical rear rim profile allows for better balancing of spoke tensions between drive and non drive side, giving better symmetry to an asymmetric component.
Increased efficiency and reactivity are sure to be noted.
Racing 7 LG CX - Asymmetric rear rim profile
Racing 7 LG CX - Hubs and flange

Hubs and flange

High grade, top quality steel bearings with cup and cone construction reduce friction and ensure consistent performance over time.
Double seal protects the ball bearing seats from water and mud, ensures consistent performance over time.

Spokes and nipples

Steel spokes with 2mm cross-section provide high levels of tension and stiffness.
Aluminium nipples: make it possible to reduce the peripheral mass of the cyclocross wheels to the minimum, thus increasing its reactivity.
Racing 7 LG CX - Spokes and nipples